Looking for the names of a few decent shops around Flint to prep a stock 350 for lead sled racing. Thanks

There a few here in the Flint area that do great work and will give excellent tech advice.
Rat Tech and Bryants have done work for me and quite few others..

m15 machine shop milington, ask for Ron, tell him Ryan sent you, 989-871-2567

Call Rickey Bryant, tell him that Gavin sent you.

810 686-5666

Give Mel a call at Rat Tech 810-6877020. He's got top cars running in every class. Ed Doutre Jr Pro Late Model#73 07 Track Champion

I would use Tony Brabbs who works at Fenton Machine shop in Fenton.

810 714-7315

Call Roger's at 989-865-6455 in St Charles. He has many Championship Motors. !st & 2nd Prolates at AC. Tractor Pullers, Drag Cars and he is certified FAA to do airplanes. He is also a little cheaper when you tell him Bubba sent you. Call him and see what it costs.


Greg

I use Street'N'Strip in Plainwell and Bliss Machine near Baldwin. R&D Repair in Suttons Bay builds the motors but the other 2 do most of the machine work for use. I've been running my Late Model motor since 1998 with no problems at all. I've turned it as high as 8900rpm with no problems. Wet sump steel head Ford. They do great work at a good price.

Fenton Machine Shop does a lot of top motors in the Mod and Factory Stock class........Tony Brabbs runs the engine building department. Call the number posted above and you will not be dissapointed.

His clients include himself, Joe Hodgeson Jr., myself and my brother, John Summers, Greg Fullarton, and a host of others.

Call them soon he is very busy!

Plus its not too far from Flint just down on 23 and get off at Thompson Rd. a few miles east.

Thanks everyone for the recommendations.

i would still call mike at valley...i already gave you his number

If you're heading to Rogers in St. Charles, Backwoods Racing, Inc. in Midland isn't much farther. Worth the drive. Equipped with RMC/Sunnen's new computerized CNC to blueprint, lighten, stroker clearance, etc. Top notch equipment including a Stuska engine dyno to validate performance. Equipment is not everything - engine builders, Corey Luneack and Larry Osborne, have a combined 50+ years of experience in circle track and drag strip applications. Block machining packages start at $289. Still time to have your project done by spring! 989-837-6311.

One of the best things about using Tony Brabbs is that he will be racing at the same track as you. He gives you alot of imput and does excellent work. This is an important decision, and that is why I use Tony. Plus once you get to know Tony he's a really good guy.